TRT160 | TRT Series Tilting Rotary Table
The TRT160 tilting rotary table is a model-level RFQ product for milling, angular positioning and indexing setups. It is selected when a workpiece must be positioned at a controlled rotary angle and the table size, tilting range, mounting clearance, workpiece weight and machine table compatibility need to be checked before supply.
Technical Specifications
| Model | TRT160 |
|---|---|
| Table Diameter (mm) | φ160 |
| Center Taper (Morse) | 2# |
| Center Bore Diameter | φ25×6 |
| T-slot Width (mm) | 10 |
| Worm Module | 1.5 |
| Locating Key Width (mm) | 12 |
| Adjacent T-slot Angle | 90° |
| Worm Ratio | 1:90 |
| Table Circumferential Scale | 360° |
| Tilt Range | 0°–90° |
| Handwheel Graduation | 1′ |
| Vernier Minimum Reading | 10" |
| Tilting Vernier Minimum Reading | 2′ |
| Indexing Accuracy | 80" |
| Max Table Load (kg) | 100 |
| Net Weight (kg) | 36 |
| Gross Weight (kg) | 44 |
| Compatible Chuck | K11125 |
| Order No. | B071010 |
| A | 255 |
| B | 172 |
| C | 160 |
| D | 168 |
| E | 11 |
| F | 138 |
| H | 100 |
| M | MT2 |
Selection Information
Before requesting a quote, confirm the machine table size, required table diameter, workpiece size and weight, tilting angle requirement, mounting layout, clearance around the workpiece and whether the setup requires repeated angular positioning.
Typical Applications
- Angular milling and drilling operations
- Inclined surface machining
- Rotary indexing with tilting adjustment
- Toolroom and fixture setup work
- Workpieces requiring controlled angular positioning
What to Confirm Before Ordering
- Machine model and table size
- Required rotary table diameter
- Workpiece size and weight
- Required tilting angle or angular positioning range
- Mounting layout, clearance and accessory requirements
Related Resources
FAQ
What is the TRT160 tilting rotary table used for?
It is used for milling and indexing setups where the workpiece must be rotated and tilted into a controlled angular position. Final selection depends on table size, workpiece load, machine table layout, tilt requirement and available clearance.
What information is needed for a quote?
Send the machine model, table size, workpiece dimensions, workpiece weight, required angle range, mounting layout and any fixture or accessory requirements.
Can this tilting rotary table fit every milling machine?
No. Fit depends on the machine table, mounting slots, available height, workpiece size, operating clearance and the required angle range. These conditions should be reviewed before ordering.
Request a Quote
Request a quote with your machine model, workpiece details and tilting rotary table requirements.
