42 mm | Rubber-Flex Collet
The TOP-TOOL 42 Rubber-Flex Collet is a replaceable rubber-flex clamping element for round, square or hexagonal workpieces.
Rubber-flex collets provide broad contact around the workpiece and are selected according to shape, clamping range and required repeatability.
Key Features
- Rubber-flex clamping provides broad contact around the workpiece.
- Suitable for workpieces requiring stable, repeatable and surface-sensitive clamping.
- Different series support through-hole, blind-hole, inner-stop, expanding, air-operated, accessory and multi-spindle applications.
- Model selection is based on clamping range, chuck size, mounting method and repeatability requirement.
Typical Applications
- Round, square or hexagonal workpieces
- Thin-wall or surface-sensitive parts
- Workpieces requiring broad contact clamping
- Repeat CNC workholding applications
- Applications where jaw marks or point contact should be reduced
- Rubber-flex collet setup, changeover or preparation workflows where applicable
Selection Notes
- Confirm the workpiece shape and clamping diameter.
- Check whether the application requires through-hole, blind-hole, inner-stop, expanding, air-operated or multi-spindle clamping.
- Review clamping range, mounting method and repeatability.
- Confirm whether a chuck assembly, replaceable rubber-flex collet element or supporting tool is required.
- Send the workpiece drawing and machine information for technical review before ordering.
Technical Specifications
Model and Dimensional Parameters
| Type | 42 |
|---|---|
| Code | 42S |
| L [mm] | 42 |
| D [mm] | 79.3 |
| d（Round)[mm] | 6–42 |
| d（Square)[mm] | 7–38 |
| d（Hex)[mm] | 7–30 |
Model and Dimensional Parameters
| Type | 42 |
|---|---|
| Code | 42R |
| L [mm] | 42 |
| D [mm] | 79.3 |
| d（Round)[mm] | 8–42 |
| d（Square)[mm] | 8–38 |
| d（Hex)[mm] | 8–30 |
Model and Dimensional Parameters
| Type | 42 |
|---|---|
| Code | 42RL |
| L [mm] | 42 |
| D [mm] | 79.3 |
| d（Round)[mm] | 11–42 |
| d（Square)[mm] | — |
| d（Hex)[mm] | — |
Model and Dimensional Parameters
| Type | 42 |
|---|---|
| Code | 42EM |
| L [mm] | 42 |
| D [mm] | 79.3 |
| d（Round)[mm] | 4–42 |
| d（Square)[mm] | — |
| d（Hex)[mm] | — |
Request a Quote
This product is supplied by quotation. Send your machine model, workpiece drawing, clamping range, required repeatability and quantity so that the configuration can be reviewed before ordering.