TS800A | TS-A Series Rotary Table
The TS800A TS-A Series rotary table is a model-level RFQ product for milling, indexing and angular positioning setups. It is selected when a workpiece must be positioned in a controlled rotary layout and the table size, mounting layout, workpiece load and machine table compatibility need to be checked before supply.
Technical Specifications
| Model | TS800A |
|---|---|
| Table Diameter (mm) | φ800 |
| Center Taper (Morse) | 6# |
| Center Bore Diameter | φ75×14 |
| T-slot Width (mm) | 22 |
| Adjacent T-slot Angle | 45° |
| Locating Key Width (mm) | — |
| Worm Module | 5.5 |
| Worm Ratio | 1:120 |
| Table Circumferential Scale | 360° |
| Table Angle per Worm Revolution | 3° |
| Vernier Minimum Reading | 10" |
| Indexing Accuracy | 30" |
| Max Table Load (kg) | 1250 |
| Net Weight (kg) | 800 |
| Gross Weight (kg) | 855 |
| Packing Size (mm) | 1175×1090×391 |
| Compatible Chuck | K11630A |
| Order No. | B061017 |
| D | Φ800 |
| A | 1000 |
| B | 890 |
| C | 1080 |
| G | 22 |
| H | 215 |
| K | 364 |
| L | 535 |
| M | MT6 |
| P | 76 |
| Q | 250 |
| d | Φ75 |
| h | 14 |
Selection Information
Before requesting a quote, confirm the machine table size, required rotary table size, workpiece dimensions, workpiece weight, mounting layout, indexing requirement and any fixture or accessory needs.
Typical Applications
- Rotary positioning on milling machines
- Indexing for drilling, milling and slotting setups
- Angular workholding for repeatable machining operations
- Fixture layouts requiring controlled rotation
- Toolroom, repair and production machining setups
What to Confirm Before Ordering
- Machine model and table size
- Required rotary table size
- Workpiece size and weight
- Mounting layout and available clearance
- Indexing, fixture and accessory requirements
Related Resources
FAQ
What is the TS800A TS-A Series rotary table used for?
It is used for milling and indexing setups where a workpiece needs controlled rotary positioning. Final selection depends on table size, workpiece load, machine table layout, mounting method and required indexing operation.
What information is needed for a quote?
Send the machine model, table size, workpiece dimensions, workpiece weight, required indexing or positioning operation, mounting layout and any accessory requirements.
Is this rotary table suitable for every machine?
No. Fit depends on table space, mounting slots, workpiece size, operating clearance and the required machining process. These conditions should be reviewed before ordering.
Request a Quote
Request a quote with your machine model, workpiece details and rotary table requirements.
