Manual lathe chucks hold round, square or irregular workpieces on lathes and related turning setups. TOP-TOOL lists manual chuck options for shops that need to compare jaw style, chuck diameter, mounting method and clamping range before purchase or RFQ review.
How to Select Manual Chuck
Confirm chuck diameter, jaw count, clamping range, mounting interface, spindle or backing-plate requirement, workpiece shape and whether self-centering or independent jaw adjustment is needed.
Typical Applications
- General lathe workholding
- Workshop turning and repair work
- Round bar, ring and sleeve clamping
- Irregular workpiece setup with independent jaws
- Manual chuck replacement or machine matching
Representative Products
- CHANFOR SK-06 6 in 3 Jaw Lathe Chuck, JIS Standard Self-Centering Manual Scroll Chuck, Front Mounting Bolt Design, <=0.03 mm Repeatability,2000 RPM for CNC Lathe & 4th Axis
- TOP-TOOL 1000mm / 40-Inch 4-Jaw Independent Lathe Chuck, Plain Back, Clamping Range 100–1000 mm (3.94–39.37 in), T-Key
- TOP-TOOL 325D11, 325mm / 12-Inch 3-Jaw Self-Centering Lathe Chuck, Form D Short-Taper Camlock, Clamping Range 11.5–320 mm (0.45–12.60 in), Two-Piece Jaws (Master + Reversible Top Jaws), Pre-Mounted Set, T-Key, Direct Mount (No Backing Plate)
- TOP-TOOL Professional 4-Jaw Self-Centering Lathe Chuck, 320mm / 12-Inch, Clamping Range 11.5–320 mm (0.45–12.60 in), Solid One-Piece Jaws, Outside Jaws Mounted + Inside Jaw Set, T-Key, Plain Back
- TOP-TOOL 1600mm /63-Inch 4-Jaw Independent Lathe Chuck, Plain Back, Clamping Range 250–1600 mm (9.84–62.99 in), T-Key
- TOP-TOOL Professional 4-Jaw Self-Centering Lathe Chuck, 250mm / 10-Inch, Clamping Range 6–250 mm (0.24–9.84 in), Solid One-Piece Jaws, Outside Jaws Mounted + Inside Jaw Set, T-Key, Plain Back
- TOP-TOOL Professional 4-Jaw Self-Centering Lathe Chuck, 200mm / 8-Inch, Clamping Range 4–200 mm (0.16–7.87 in), Solid One-Piece Jaws, Outside Jaws Mounted + Inside Jaw Set, T-Key, Plain Back
- TOP-TOOL Professional 4-Jaw Self-Centering Lathe Chuck, 160mm/6-inch, Cast Iron Construction, 2-80mm Clamping Range with Internal External Jaws and T-Key
Related TOP-TOOL Pages
- Hydraulic Chucks
- Pneumatic Chucks
- Collet Chucks
- Machine Vises
- Machine Tool Accessories
- Request a Quote
Manual Chuck FAQ
What is Manual Chuck used for?
Manual Chuck is used for machine tool workholding, setup or accessory matching where the machine, interface and workpiece requirements must be checked before selection.
What information is needed for a quote?
Send the machine model, interface or mounting details, workpiece drawing or size, required model or range, quantity and application notes.
How do I choose between types or models?
Compare the machine interface, workpiece size, clamping or holding method, required clearance and model-level specifications. If the fit is uncertain, request RFQ review before ordering.
Is this category handled by RFQ or online purchase?
This category is normally handled as RFQ because final suitability depends on the actual machine, interface, workpiece and application details.
What related products should I compare?
Compare the related TOP-TOOL pages listed on this collection page, especially neighboring workholding or machine tool accessory categories that share machine-interface or setup requirements.
Are listed specifications final compatibility guarantees?
No. Listed data is for model identification and quotation review. Final suitability should be confirmed against the actual machine, workpiece, setup and operating conditions.
Request a Quote with your machine, workpiece, product model or application details.