3PB-06 A5 | 6 in Pull-Back Hydraulic Chuck, A5 Mount
The TOP-TOOL 3PB-06 is a 6 in pull-back hydraulic chuck for CNC lathes with an A5 mount. During clamping, the pull-back action draws the workpiece toward a locating surface, helping improve axial seating, repeat length control and workpiece location consistency.
A pull-back hydraulic chuck combines radial clamping with axial seating action. It is intended for applications where radial clamping alone cannot control the workpiece position accurately enough.
Key Features
- Pull-back / draw-down action seats the workpiece against a locating surface during clamping.
- Helps improve repeat length control and end-face location.
- Hydraulic actuation supports repeatable CNC lathe production clamping.
- Suitable when axial positioning is more important than standard radial holding alone.
- Available with source-confirmed spindle mount configurations.
Typical Applications
- Workpieces requiring end-face seating
- Parts requiring repeat length control
- CNC lathe axial locating applications
- Flange, sleeve and disc-type workpieces
- Jobs where radial clamping alone cannot control axial position
Selection Notes
- Confirm the required axial locating face.
- Check pull-back stroke and drawbar movement.
- Match the chuck size, spindle nose and hydraulic cylinder force.
- Review clamping force, maximum speed and cutting load.
- Confirm that the workpiece can be pulled safely against the locating surface.
Technical Specifications
Main Installation Dimensions
| Model | 3PB-06 |
|---|---|
| Spindle Nose | A5 |
| A | 165 |
| B | 85 |
| C | 140 |
| D | 104.8 |
| D1 | 82.56 |
| D2 | 116 |
| E | 5 |
| E1 | 15 |
| F | 35 |
| G max | 30 |
| G min | 15 |
| H | 35 |
| J | 32 |
| J1 | 13 |
| K | 55 |
| L1 | 13 |
Stroke and Performance Parameters
| Model | 3PB-06 |
|---|---|
| Spindle Nose | A5 |
| Wedge Stroke | 15 |
| Jaw Stroke(Diameter) | 7.8 |
| Allowable Push/Pull Force kN(kgf) | 9(910) |
| Max Clamping Force kN(kgf) | 25(2550) |
| Max Speed r/min | 3500 |
| Clamping Range | 22-165 |
| Moment of Inertia kg·m2 | 0.05 |
| Weight kg | 16.8 |
| Matching Cylinder | 75Q |
| Max Pressure MPa(kgf/cm2) | 2.5(25) |
Request a Quote
This product is supplied by quotation. Send your machine model, workpiece drawing, required clamping method and quantity so that the configuration can be reviewed before ordering.
Made with care
Heirloom quality
Premium materials
Classic styling
Styled With
